Jali panels made from your pattern
Ferum cuts jali panels for architects, interior designers and contractors on a 3 kW fiber laser in Vasai East. Send a pattern file, artwork, a photo of an existing jali or a sketch, and the cutting files are prepared to the exact size of each panel.
Panels are supplied cut and finished. Frames, fixing brackets and folded edges can be fabricated in the same order.
Where jali panels are used
- Interior partitions and room dividers
- Facade and balcony privacy screens
- Staircase infill and feature walls
- Screens that hide rooftop plant, generators and service areas
- Garden screens and landscape panels
Patterns
Floral and traditional jali, geometric star patterns, Voronoi cells, halftone images and slotted waves can all be cut. A pattern is fitted to each panel so that cells stay whole at the edges and run on across joints between panels.
Materials and finishes
Stainless steel 304 is buffed in-house and suits wet areas, facades and long-life interiors. Mild steel is the economical choice and is powder coated or painted through finishing partners. Aluminium keeps large panels light.
What size can a jali panel be?
A single panel can be up to 1500 × 3000 mm, the size of the laser bed. Larger screens are split into panels, with the joints planned into the pattern so the screen reads as one piece once installed.
Designing a jali for laser cutting
Each pattern is checked before cutting. The metal between openings must be wide enough not to burn through or warp, openings need a minimum size for the sheet thickness, and a solid border keeps the panel flat and leaves room for fixings. Any piece that would drop out gets a bridge, shown on the drawing for approval. Decorative screens are usually cut in 2 to 6 mm sheet.




