Sheet metal enclosures and cabinets

Enclosures, cabinets and equipment housings cut, bent, welded and finished to your drawing in one facility, from a single prototype to a repeat batch.

Stainless steel equipment housing fabricated by Ferum for Avior Aqua
Materials
MS, SS, aluminium
Sheet size
Up to 1500 × 3000 mm
Processes
Cut, bend, weld, finish
Minimum order
None

Enclosures built to your drawing

Ferum makes sheet metal enclosures and cabinets for OEMs, machine builders and contractors across Mumbai, Thane and Vasai-Virar, with delivery anywhere in India. Panels are laser cut, formed on a hydraulic press brake and welded in the same facility, so one order covers the whole build.

Every drawing gets a technical review before quotation. Door construction, hinge and lock type, ventilation, cable entry and finish are agreed at that stage, and anything outside machine capacity is flagged early.

What we make

  • Control panel enclosures: cabinets with cut-outs for switches, meters, displays and cable glands.
  • Equipment housings: enclosures for pumps, blowers, water-treatment units and machinery.
  • Wall-mounted cabinets: boxes with hinged doors and keyhole or bracket mounting.
  • Mobile cabinets: units on castors with openings for gauges, flow meters and controls.
  • Covers and guards: access covers, machine guards and perforated screens.

How an enclosure is built

Flat blanks with louvres, vent slots, cut-outs and fixing holes are laser cut from the drawing. The blanks are bent into the body, door and frame, then joined by spot, argon or CO2 welding. Hinges, locks and other hardware are fitted as specified.

Stainless steel is buffed in-house. Mild steel is powder coated or painted through finishing partners. Lettering and logos can be cut straight through a panel, as on the Avior Aqua units.

Which material suits an enclosure?

Mild steel is the economical choice for indoor cabinets that will be powder coated. Stainless steel suits housings that face water, washdown or outdoor use, and is buffed rather than painted. Aluminium keeps large covers and portable units light. The material and thickness are confirmed from the drawing before quotation.

Samples before the batch

For repeat batches, one sample enclosure can be built for approval first, and you can visit the facility to review it before the production run starts. There is no minimum order, so a single prototype is accepted as readily as a batch.

How an order runs

From a drawing to finished parts, with one point of contact throughout.

  1. Upload the drawing

    DXF, STEP, PDF, a dimensioned sketch or a clear photo.

  2. Technical review

    Material, quantity and finish are checked against the machines.

  3. Manufacture

    Cutting, bending, welding and machining under one roof.

  4. Finishing

    Buffing in house. Powder coating and painting through partners.

  5. Delivery

    Anywhere in India, at actual logistics cost.

Questions buyers ask

Can you make an enclosure from our drawing?

Yes. Send a DXF, STEP or PDF drawing, a dimensioned sketch or a photo of an existing unit. Every drawing gets a technical review before quotation.

Is there a minimum order for enclosures?

No. Single prototypes and repeat batches are both accepted. For batches, one sample can be approved before production.

Which materials are used?

Mild steel, stainless steel and aluminium. Material and thickness are confirmed from the drawing.

Do you supply hinges, locks and other hardware?

Hardware is fitted as specified. The type and supplier are agreed at the technical review.

What finishes are available?

Stainless steel is buffed in-house. Mild steel is powder coated or painted through finishing partners.

Do you deliver outside Mumbai?

Yes, anywhere in India at actual logistics cost.

Parts move between processes in the same facility, with no transport between vendors.

Laser-cut jali panels

Jali panels and decorative screens cut from your pattern.

View

Custom fabrication

Frames, skids, enclosures and housings, built complete.

View

Laser cutting

Profiles, brackets, flanges and panels cut from your DXF.

View

Sheet metal bending

Panels, channels and enclosures formed on a hydraulic press brake.

View

Have a drawing? Get it made.

Upload a DXF, STEP, PDF, sketch or photo, or send it on WhatsApp. Files are reviewed and questions come back by phone or email.

Facility
Gala No. G9, Nadeem Industrial Estate, Chinchoti, Vasai East, Palghar, Maharashtra 401208
Phone and WhatsApp
+91 88506 17559
Email
ferum_info@ferumengineering.com
Hours
Monday to Saturday, 9:30 am to 6:30 pm